English translation for "common mode voltage"

共模电压
共态电压

Example Sentences:

	1.	Common mode voltage , asymmetrical voltage 不平衡电压
	2.	Common mode voltage asymmetrical voltage 不平衡电压
	3.	Common mode voltage 共模电压
	4.	Restraint of the common mode voltage in matrix converter - permanent magnetic synchronous machine system 永磁同步电机系统的共模电压抑制
	5.	Because the output voltage of pwm inverter is dissymmetry instantly , the common mode voltage appears as a result 由于pwm变频器的三相输出电压在瞬间并不对称，所以导致电机三相定子绕组的电压矢量和不为零，从而出现共模电压。
	6.	The common mode voltage has high abrupt transformation rate because of the fast switching devices , whose dv / dt can exceed 6000 v / us . under so high dv / dt , the oil film acts as a capacitor and provides a charging mechanism for rotor shaft voltage buildup 由于变频器的高开关频率，导致共模电压具有很高的电压变化率，其dv dt可以达到6000v us以上，在如此高的电压变化率下，润滑油膜充当了电容的作用对转轴进行充电，形成轴电压。
	7.	The thesis has done the widespread investigation and study to the domestic and foreign ’ s technologies of analogy low voltage and low power , and analyzes the principles of work , merts and shortcomings of these technologies , based on the absorption of these technologies , it designs a 1 . 5v low power rail - to - rail cmos operational amplifier . when designing input stage , in order to enable the input common mode voltage range to achieve rail - to - rail , it does not use the traditional differential input pair , but use the nmos tube and the pmos tube parallel supplementary differential input pair to the structure , and uses the proportional current mirror technology to realize the constant transconductance of input stage . in the middle gain stage design , the current mirror load does not use the traditional standard cascode structure , but uses the low voltage , wide - swing casecode structure which is suitable to work in low voltage . when designing output stage , in order to enhance the efficiency , it uses the push - pull common source stage amplifier as the output stage , the output voltage swing basically reached rail - to - rail . the thesis changes the design of the traditional normal source based on the operational amplifier , uses the differential amplifier with current mirror load to design a normal current source . the normal current source provides the stable bias current and the bias voltage to the operational amplifier , so the stability of operational amplifier is guaranteed . the thesis uses the miller compensate technology with a adjusting zero resistance to compensate the operational amplifier 本论文对国内外的模拟低电压低功耗技术做了广泛的调查研究,分析了这些技术的工作原理和优缺点,在吸收这些技术成果基础上设计了一个1 . 5v低功耗轨至轨cmos运算放大器。在设计输入级时,为了使输入共模电压范围达到轨至轨,不是采用传统的差动输入结构,而是采用了nmos管和pmos管并联的互补差动输入对结构,并采用成比例的电流镜技术实现了输入级跨导的恒定;在中间增益级设计中,电流镜负载并不是采用传统的标准共源共栅结构,而是采用了适合在低压工作的低压宽摆幅共源共栅结构;在输出级设计时,为了提高效率,采用了推挽共源级放大器作为输出级,输出电压摆幅基本上达到了轨至轨;本论文改变传统基准源基于运放的设计,采用了带电流镜负载的差分放大器设计了一个基准电流源,给运放提供稳定的偏置电流和偏置电压,保证了运放的稳定性;并采用了带调零电阻的密勒补偿技术对运放进行频率补偿。

Similar Words：

"common mode rejection" English translation, "common mode rejection ratio" English translation, "common mode rejection ratio(cmrr)" English translation, "common mode signal" English translation, "common mode terminal" English translation, "common model" English translation, "common modiolar vein" English translation, "common mole" English translation, "common mole-rats" English translation, "common monetary measuring unit" English translation